DOMESTIC LIFTING STATIONS:
1) BABYSOL SMALL lifting station from 100 to 200 litres.
The Baby small rainwater or wastewater recycling station is the smallest in the range. Its use concerns small domestic utilities. To improve the operation ensuring the station provides at its entrance a filter that allows you to collect (pieces of paper, plastic materials, absorbents). Only one pump is planned to be installed at this lifting station. It is usually located in basements. The tank is equipped with floats and control panel
2) BABYSOL small lifting station from 100 to 400 litres.
The Babysol wastewater lifting station has a capacity of between 100 and 400 litres. The tank also includes the possibility of installing two pumps. The system is usually installed in basements. These stations are ideal for pumping rainwater from your own home. Moreover, thanks to a grid already mounted at the entrance, they allow the elimination of coarse parts composed of paper, plastic pieces, etc.. The supply also includes an electric control panel.
3) MINISOL lifting station from 250 to 400 litres.
The Minisol type water lifting station is suitable for lifting medium-sized wastewater. The diameter of the outlet pipe at the final delivery is 50 mm. The station consists of pumps, and floats, flap lid, sewage inlet pipe, pump delivery pipes, pumped liquid outlet pipes, cast iron ball check valve. It is always recommended upstream to insert a roughing system with imhoff or sand remover in order to prevent hitches and malfunctions.
4) Lifting station model MINISOL XL from 650 to 1450 litres.
The Minisol xl type water lifting station is the largest among the relaunch stations serving civilian homes. The polyethylene tank has a vertical development and is of the corrugated type in order to ensure proper burial. The system consists of high density polyethylene container and upper hatches that allow it to be inspected and maintained. Depending on the needs, the pumps can be free or quick coupling.
PROFESSIONAL LIFTING STATIONS:
1) CORRUGATE lifting station from 1050 to 3700 litres.
Corrugated lifting station made of polyethylene with a tank size between 1050 and 3700 liters. The pumping system is controlled by an electrical panel and the start is via the start/stop and emergency floats. The system has a pipe system with a diameter of 2″. These are tanks that have pumps positioned on the bottom but that have the possibility of lifting for maintenance through guide tubes.
2) Lifting station model MAXISOL from 1200 up to 5400 liters.
Maxisol lifting station consists of pump, electric control panel, floats. It is used to lift dirty and dirty water for medium-sized utilities. They can also be occupied to lift the waters of large squares with high horizontal distance and prevalence. The waste water outlet pipe is of medium size with its 80 mm. If necessary, the tank can be composed of a manoeuvring chamber to facilitate maintenance operations.
3) Lifting station model MAXISOL XL from 5800 up to 14600 liters.
The Maxisol XL station has a capacity between 5800 liters and 14,600 liters. It consists of a tank where the pumps are located and a control room to better maintain and inspect the lifting station. The manoeuvring chamber has a single collector for sending waste water. It is sent to the final collector by means of a 150 mm tube. of diameter. These are however lifting stations serving large users.
